Intelligent Xpansion Power Distribution Module

The Murphy Intelligent Xpansion™ Power Distribution Module (PDM) expands CAN bus control networks by replacing existing relay and fuse boxes with more reliable solid-state switches that can directly drive work lights, wiper motors, cooling fans, directional DC motors and other high current loads.

Featuring digital switching and up to 15-amp outputs, the module is housed in a compact, sealed enclosure which can be mounted remotely on the equipment to greatly reduce wiring costs. For applications not requiring a CAN bus control, the inputs can directly trigger outputs without the need for a dedicated controller.

Specifications

  • Operating Voltage: 8-32V (IX3212-24) for 12V and 24V Systems
  • Total Current: 70 A maximum continuous
  • Dimensions: 245 mm (L) x 140 mm (W) x 50 mm (H)
  • Mass: 0.9 kg (2.0 lb)
  • Operating Temperature: -40°F to 185°F (-40°C to 85°C)
  • Storage Temperature: -40°F to 275°F (-40°C to 135°C)
  • Electrical and EMI/EMC:
    • 2004/108/EC and 2006/95/EC directives
    • IEC 61000-4-3, -4-6 and -4-8
    • EN 60945 / CISPR 11
    • EN 61326-1
  • Shock: 30G, 3 cycles
  • Vibration: 5-25g, 50-2,000Hz, 72 hrs per axis
  • Sealing:
    • IP66 and 67
    • SAE J1455 4.5.3 (10,300 kPa @ 50°C and 100 mm away for 15 min)
  • 12 Outputs:
    • (6) 15 A max per channel, 500 Hz
    • (6) 15 A max, 1 kHz
    • Channel overload set in 2.5 A increments
    • High-side, open-loop PWM and directional DC motor control (H-bridge) modes
    • Off-state leakage current <0.1 mA
  • 20 Inputs:
    • 12 digital, tri-state, input impedance 7.7 kΩ
    • 6 analog, 0-5 V, input impedance 100 kΩ pull-down
    • 2 analog, resistive, input impedance 2.2 kΩ pull-up
    • 10 bit resolution on all analog inputs
  • Sensor Supply: 5V @ 70 mA
  • Communications: 1 CAN 2.0B, 250 kbps, J1939 proprietary messaging
  • Mating Connectors:
    • Deutsch DTHD, DT, and DTP Series
      • J1, J2 – DTHD06-1-4S
      • J3 – DT06-12SA (Gray)
      • J4 – DT06-12SB (Black)
      • J5 – DT06-12SC (Green)
      • J6 – DTP06-2S
  • Certifications: CE mark

Service done right

Service Network

Palmer Johnson's six-location factory-authorized service center network features:

  • Factory-trained technicians
  • Field service
  • Onsite troubleshooting and diagnostics
  • Unit removal and installation

For service, call 1-800-341-4334.

Learn more

Madison, WI

Service Center

Service: (608) 834-5206

1835 Haynes Dr
Sun Prairie, WI 53590

Contact

Dallas, TX

Service Center

Service: (817) 505-2430

608 112th St
Arlington, TX 76011

Contact

Denver, CO

Service Dealer

Service: (720) 724-0033

5151 E 56th Ave
Commerce City, CO 80022

Contact

Kansas City, KS

Service Center

Service: (913) 202-6944

15360 South Mahaffie St
Olathe, KS 66062

Contact

Los Angeles, CA

Service Center

Service: (562) 356-1590

12020 Bloomfield Ave
Santa Fe Springs, CA 90670

Contact

Oklahoma City, OK

Warehouse

Sales: (800) 341-4334

Oklahoma City, OK 73128

Contact

Phoenix, AZ

Service Dealer

Service: (602) 253-0214

2401 S. 19th Street
Phoenix, AZ 85034

Contact

San Francisco, CA

Service Dealer

Service: (510) 342-2212

1930 W Winton Ave #14
Hayward, CA 94545

Contact

Seattle - Mining & Equipment, WA

Service Center

Service: (253) 518-6050

22221 70th Ave S
Kent, WA 98032

Contact

St. Louis, MO

Service Center

Service: (636) 203-9811

578 Rudder Rd
Fenton, MO 63026

Contact

Philadelphia, PA

Service Dealer

Service: (215) 822-8300

159 Discovery Dr
Colmar, PA 18915

Contact

Fort Myers, FL

Service Dealer

Service: (239) 693-7477

4821 Waycross Road
Fort Myers, FL

Contact

Odessa, TX

Service Center

Service: (432) 287-1015

12706 W County Rd 100
Odessa, TX 79765

Contact

Vancouver, British Columbia

Service Center

Service: (604) 879-6731

6741 Cariboo Rd Unit 205
Burnaby, British Columbia V3N 4A3

Contact

Edmonton, Alberta

Service Center

Service: (780) 434-9578

3804 53rd Ave NW
Edmonton, Alberta T6B 3N7

Contact

Seattle - Marine, WA

Service Center

Service: (425) 251-3434

18547 E Valley Hwy
Kent, WA 98032

Contact

RECON Equipment Center, WI

Service Center

Service: (608) 834-5220

1828 Haynes Dr
Sun Prairie, WI 53590

Contact
Map of Palmer Johnson Power Systems locations