XM500

The XM500 module is a configurable Input/Output (I/O) module designed to bring analog and digital inputs and output onto the SAE J1939 CAN.

The XM500 is ideally suited to bring the additional information needed onto the J1939 CAN bus and can be configured to broadcast fault codes and activate digital outputs per input condition such as fuel level low, hydraulic oil temperature high, etc. Because the XM500 broadcasts information using the J1939 standard protocol, the information can be displayed using standard J1939 display modules, such as the PowerView® 101.

Electrical

  • Power Input: 8 to 28VDC
  • Communication Ports: CAN J1939
  • Operating Temperature: -40°F to 185°F (-40°C to 85°C)
  • Digital Inputs: 4 - Ground or battery positive activation
  • Digital Outputs*: 2 Sinking (500 mA)
  • Product Weight: 10 ounces
  • Shipping Weight: 12 ounces
  • Shipping Dimensions: 4” x 6” x 2”
    *(Outputs are NOT reverse polarity protected. Damage will occur if B+ is connected to the outputs. Damage incurred from improper installation is not covered under the Murphy limited warranty policy.)
  • Thermocouple Input1: Type K and Type J
  • Analog Inputs2:
    • 1 - Battery Supply Voltage (dedicated)
    • 7 - Configurable as 0-5VDC, 4-20mA, resistive senders3 or used as an additional digital input
  • Speed Sensing Input: Magnetic pickup (2 to 120VAC RMS from 30 to 10,000 Hz)

1When the thermocouple input is used, only 5 resistive, 4-20 mA, or 0-5 VDC can be used instead of 7.

2Analog inputs can be exchanged for digital inputs (battery ground activation only) for a total of 11 digital inputs.

3Other resistive senders can be supported. Contact Murphy’s Industrial Panel Division for programming charges.

Service done right

Service Network

Palmer Johnson's six-location factory-authorized service center network features:

  • Factory-trained technicians
  • Field service
  • Onsite troubleshooting and diagnostics
  • Unit removal and installation

For service, call 1-800-341-4334.

Learn more

Madison, WI

Service Center

Service: (608) 834-5206

1835 Haynes Dr
Sun Prairie, WI 53590

Contact

Dallas, TX

Service Center

Service: (817) 505-2430

608 112th St
Arlington, TX 76011

Contact

Denver, CO

Service Dealer

Service: (720) 724-0033

5151 E 56th Ave
Commerce City, CO 80022

Contact

Kansas City, KS

Service Center

Service: (913) 202-6944

15360 South Mahaffie St
Olathe, KS 66062

Contact

Los Angeles, CA

Service Center

Service: (562) 356-1590

12020 Bloomfield Ave
Santa Fe Springs, CA 90670

Contact

Oklahoma City, OK

Warehouse

Sales: (800) 341-4334

Oklahoma City, OK 73128

Contact

Phoenix, AZ

Service Dealer

Service: (602) 253-0214

2401 S. 19th Street
Phoenix, AZ 85034

Contact

San Francisco, CA

Service Dealer

Service: (510) 342-2212

1930 W Winton Ave #14
Hayward, CA 94545

Contact

Seattle - Mining & Equipment, WA

Service Center

Service: (253) 518-6050

22221 70th Ave S
Kent, WA 98032

Contact

St. Louis, MO

Service Center

Service: (636) 203-9811

578 Rudder Rd
Fenton, MO 63026

Contact

Philadelphia, PA

Service Dealer

Service: (215) 822-8300

159 Discovery Dr
Colmar, PA 18915

Contact

Fort Myers, FL

Service Dealer

Service: (239) 693-7477

4821 Waycross Road
Fort Myers, FL

Contact

Odessa,

Service Center

Service: (432) 287-1015

By Appointment Only

Contact

Vancouver, British Columbia

Service Center

Service: (604) 879-6731

6741 Cariboo Rd Unit 205
Burnaby, British Columbia V3N 4A3

Contact

Edmonton, Alberta

Service Center

Service: (780) 434-9578

3804 53rd Ave NW
Edmonton, Alberta T6B 3N7

Contact

Seattle - Marine, WA

Service Center

Service: (425) 251-3434

18547 E Valley Hwy
Kent, WA 98032

Contact

RECON Equipment Center, WI

Service Center

Service: (608) 834-5220

1828 Haynes Dr
Sun Prairie, WI 53590

Contact
Map of Palmer Johnson Power Systems locations