Powercore TEC-10

Murphy's PowerCore® TEC-10 panel provides full control with easy setup and installation.

A superior turnkey electronic controller, the PowerCore® TEC-10 panel provides full control of your engine including auto start/stop, auto throttling and display of engine parameters along with critical faults from the engine/application. The TEC-10 supports SAE J1939 CAN protocols for electronically governed engines as well as analog sensors on mechanical engines for fault and safety warnings/shutdowns. The TEC-10 can also be remotely automated and monitored using the Murphy CONNECT telematics unit.

Specifications

Interface

  • Display :
    • Monochrome HR-TFT
    • 2.7 in./ 68 mm, WQVGA (400 x 240 pixels)
    • Languages: English, Spanish, German, French, Italian
  • (3) LEDs : green (mode), yellow (warning) and red (shutdown)
  • Operator controls :
    • (11) Raised silicone keypads, tactile feedback
    • (1) Rotary switch, power on/off
    • (1) Push-switch (red), engine stop

Power Supply:

  • Operating Voltage : 8-32 VDC, reverse battery polarity and load dump protected
  • Cranking Power Holdup : 0 VDC up to 50 mS(also good for brownout/blackout instances)
  • Current consumption : Power on in stopped state; 117 mA at 12 VDC. Power on in standby mode; 52 mA at 12 VDC.

Inputs (9):

  • (5) Digital, configurable (active on High, Low, Open)
  • (3) Analog, configurable (4-20 mA, 0-5V, resistive or digital ground)
  • (1) Frequency, supporting: Magnetic pickup (30 Hz - 10 kHz, 2.0 VAC-120 VAC) and Engine Alternator (30 Hz - 10 kHz, 4.5 VRMS - 90 VRMS)

Outputs (8):

  • (2) Relay, switched + DC, 10A
  • (1) Relay, Form C (dry / volt-free), 10A
  • (2) Low-side FET (– DC), 1A
  • (2) High-side FET (+DC), 1A
  • (1) Dedicated Alternator Excitation, + DC, 1A

Communications:

  • (1) CAN: J1939
  • (1) RS485: Modbus RTU

Mating Connectors:

  • 21 Position, Deutsch HDP26-24-21SE,
  • 31 Position, Deutsch HDP26-24-31SE

Physical/Environmental:

  • Enclosure material : Polycarbonate
  • Dimensions (WxHxD) : 9.59 x 7.34 x 5.20 in. (243.48 x 186.5 x 132.23mm)
  • Weight : 4 lbs (1.8 kg)
  • IP rating : IP67
  • Operating Temperature : -40° to + 85° C (-40° to 185° F)
  • Storage Temperature : -40 to + 85° C (-40° to 185° F)
  • Vibration : 7.86 Grms (5-2000 Hz), 3-axis random
  • Shock : ± 50G, 3-axis

Service done right

Service Network

Palmer Johnson's six-location factory-authorized service center network features:

  • Factory-trained technicians
  • Field service
  • Onsite troubleshooting and diagnostics
  • Unit removal and installation

For service, call 1-800-341-4334.

Learn more

Madison, WI

Service Center

Service: (608) 834-5206

1835 Haynes Dr
Sun Prairie, WI 53590

Contact

Dallas, TX

Service Center

Service: (817) 505-2430

608 112th St
Arlington, TX 76011

Contact

Denver, CO

Service Dealer

Service: (720) 724-0033

5151 E 56th Ave
Commerce City, CO 80022

Contact

Kansas City, KS

Service Center

Service: (913) 202-6944

15360 South Mahaffie St
Olathe, KS 66062

Contact

Los Angeles, CA

Service Center

Service: (562) 356-1590

12020 Bloomfield Ave
Santa Fe Springs, CA 90670

Contact

Oklahoma City, OK

Warehouse

Sales: (800) 341-4334

Oklahoma City, OK 73128

Contact

Phoenix, AZ

Service Dealer

Service: (602) 253-0214

2401 S. 19th Street
Phoenix, AZ 85034

Contact

San Francisco, CA

Service Dealer

Service: (510) 342-2212

1930 W Winton Ave #14
Hayward, CA 94545

Contact

Seattle - Mining & Equipment, WA

Service Center

Service: (253) 518-6050

22221 70th Ave S
Kent, WA 98032

Contact

St. Louis, MO

Service Center

Service: (636) 203-9811

578 Rudder Rd
Fenton, MO 63026

Contact

Philadelphia, PA

Service Dealer

Service: (215) 822-8300

159 Discovery Dr
Colmar, PA 18915

Contact

Fort Myers, FL

Service Dealer

Service: (239) 693-7477

4821 Waycross Road
Fort Myers, FL

Contact

Odessa, TX

Service Center

Service: (432) 287-1015

12706 W County Rd 100
Odessa, TX 79765

Contact

Vancouver, British Columbia

Service Center

Service: (604) 879-6731

6741 Cariboo Rd Unit 205
Burnaby, British Columbia V3N 4A3

Contact

Edmonton, Alberta

Service Center

Service: (780) 434-9578

3804 53rd Ave NW
Edmonton, Alberta T6B 3N7

Contact

Seattle - Marine, WA

Service Center

Service: (425) 251-3434

18547 E Valley Hwy
Kent, WA 98032

Contact

RECON Equipment Center, WI

Service Center

Service: (608) 834-5220

1828 Haynes Dr
Sun Prairie, WI 53590

Contact
Map of Palmer Johnson Power Systems locations