Powerview Tactile Button Displays - 25

The PowerView 25 is an engine and diagnostic display in an economical, compact package.

This J1939-compliant device provides electronic engine parameter data, is simple to install, matches the PowerView line of rugged displays and can be powered by 12-volt or 24-volt systems. The PV25 is equipped with two push buttons to quickly access a convenient menu. In addition, a back-lit graphic display and two LEDs indicate Active-fault Alarm or Shutdown status. Active and Stored Fault messages display the SPN (Suspect Parameter Number), FMI (Failure Mode Indicator) and the OC (Occurrence Count) using the SAE J1939 protocol. The PV25 displays up to 20 standard J1939 parameters in standard or metric units.

Specifications

  • Engine Parameters:
    • Engine RPM
    • Engine Oil Pressure
    • Engine Hours
    • Coolant Temperature
    • ITA/Stage IIIB Parameters
    • Active Service Codes
    • System Voltage
    • Stored Service Codes
  • Tier 4 / Stage IIIB/IV Compliant Ready
  • Operating Voltage: 6 VDC minimum to 36 VDC maximum
  • Power Supply Operating Current:
    • 460mA max @ 12 VDC
    • 810mA max @ 24 VDC
  • Reversed Polarity: Withstands reversed battery terminal polarity

Environmental

  • Operating Temperature: -40° to 158°F (-40 to 70°C)
  • Storage Temperature: -67° to 185°F (-55 to 85°C)
  • Sealing: IP68
  • CAN Bus: SAE J1939 compliant

Connectors

  • 4-pin AMP Mini-universal Mate-N-Lok Connector
  • AMP Plug: P/N 172338-1
  • AMP Socket: P/N 171639-1 (4 each, assumes 18 gage wire. See
  • AMP Plug specification to match socket and wire size.)
  • Maximum Panel Thickness: 3/8 inch (9.6 mm)
  • Shipping Weight: (all models) 0.2 lb. (0.1 kg)
  • Shipping Dimensions: (all models)
    3-7/8 x 2-3/4 x 2-3/4 in.
    (98.4 x 69.85 x 69.85 mm)

Service done right

Service Network

Palmer Johnson's six-location factory-authorized service center network features:

  • Factory-trained technicians
  • Field service
  • Onsite troubleshooting and diagnostics
  • Unit removal and installation

For service, call 1-800-341-4334.

Learn more

Madison, WI

Service Center

Service: (608) 834-5206

1835 Haynes Dr
Sun Prairie, WI 53590

Contact

Dallas, TX

Service Center

Service: (817) 505-2430

608 112th St
Arlington, TX 76011

Contact

Denver, CO

Service Dealer

Service: (720) 724-0033

5151 E 56th Ave
Commerce City, CO 80022

Contact

Kansas City, KS

Service Center

Service: (913) 202-6944

15360 South Mahaffie St
Olathe, KS 66062

Contact

Los Angeles, CA

Service Center

Service: (562) 356-1590

12020 Bloomfield Ave
Santa Fe Springs, CA 90670

Contact

Oklahoma City, OK

Warehouse

Sales: (800) 341-4334

Oklahoma City, OK 73128

Contact

Phoenix, AZ

Service Dealer

Service: (602) 253-0214

2401 S. 19th Street
Phoenix, AZ 85034

Contact

San Francisco, CA

Service Dealer

Service: (510) 342-2212

1930 W Winton Ave #14
Hayward, CA 94545

Contact

Seattle - Mining & Equipment, WA

Service Center

Service: (253) 518-6050

22221 70th Ave S
Kent, WA 98032

Contact

St. Louis, MO

Service Center

Service: (636) 203-9811

578 Rudder Rd
Fenton, MO 63026

Contact

Philadelphia, PA

Service Dealer

Service: (215) 822-8300

159 Discovery Dr
Colmar, PA 18915

Contact

Fort Myers, FL

Service Dealer

Service: (239) 693-7477

4821 Waycross Road
Fort Myers, FL

Contact

Odessa, TX

Service Center

Service: (432) 287-1015

12706 W County Rd 100
Odessa, TX 79765

Contact

Vancouver, British Columbia

Service Center

Service: (604) 879-6731

6741 Cariboo Rd Unit 205
Burnaby, British Columbia V3N 4A3

Contact

Edmonton, Alberta

Service Center

Service: (780) 434-9578

3804 53rd Ave NW
Edmonton, Alberta T6B 3N7

Contact

Seattle - Marine, WA

Service Center

Service: (425) 251-3434

18547 E Valley Hwy
Kent, WA 98032

Contact

RECON Equipment Center, WI

Service Center

Service: (608) 834-5220

1828 Haynes Dr
Sun Prairie, WI 53590

Contact
Map of Palmer Johnson Power Systems locations