MGC1000

The MurphyLink Series MGC1000 Panel, engineered and built by Enovation Controls’ Industrial Panel Division, is a superior panel offering for generator control with the powerful, yet simple-to-configure MPC-10 controller.

The MPC-10 is a general, all-purpose manual/auto start engine controller. The controller is purposed primarily for applications where a wide array of inputs and outputs are not required. The MPC-10 supports J1939 CAN protocols for electronically governed engines as well as analog sensors on mechanical engines for fault and safety shutdowns.

The Control Panel utilizes industry-standard Deutsch connector and is compatible for use on the simplest mechanical engine to the most advanced, fully electronic Tier 4 engines, when used with the correct Murphy Industrial Harness1 (MIH) or John Deere OEM engine harnessing. The MGC1000 panel can be mounted directly to the engine or engine/application cover.

  • MPC-10 Controller
    • Operating Voltage: 8-32 VDC, reverse polarity and load dump protected
    • Operating Temperature: -40° to +85° C (-40° to 185° F)
    • Storage Temperature: -40° to +85° C (-40° to 185° F)
  • Total Current Consumption:
    • Power on in stopped state; 117 mA at 12 VDC.
    • Power on in standby mode; 52 mA at 12 VDC.
  • Enclosure: Sheet Metal
  • Mating Connector: 21 Position, Deutsch HDP26-24-21SE
  • Communications:
    • (1) CAN J1939
    • (1) RS485, Modbus RTU
    • (1) USB 2.0B for Programming
  • Outputs (8):
    • (2) Relays: 10A, Dedicated B+ (30 VDC @ 10A max.), 30A maxaggregate @ 85C
    • (2) Low-side (1A)
    • (2) High-side (1A)
    • (1) Dedicated Alternator Excite (provides Charge Fail Fault if unable to excite alternator)
  • Inputs (9):
    • (2) Digital, configurable (high/low)
    • (2) Analog, configurable (4-20 mA, 0-5V, resistive)
    • (1) Frequency, supporting Magnetic pickup (30 Hz - 10 kHz, 2.0 VAC-120 VAC) and Engine Alternator (30 Hz - 10 kHz, 4.5 VRMS - 90 VRMS)
  • Dimensions: 4.16 x 6.083 x 10.68 in. (360 x 155 x 271mm) (WxHxD)

Service done right

Service Network

Palmer Johnson's six-location factory-authorized service center network features:

  • Factory-trained technicians
  • Field service
  • Onsite troubleshooting and diagnostics
  • Unit removal and installation

For service, call 1-800-341-4334.

Learn more

Madison, WI

Service Center

Service: (608) 834-5206

1835 Haynes Dr
Sun Prairie, WI 53590

Contact

Dallas, TX

Service Center

Service: (817) 505-2430

608 112th St
Arlington, TX 76011

Contact

Denver, CO

Service Dealer

Service: (720) 724-0033

5151 E 56th Ave
Commerce City, CO 80022

Contact

Kansas City, KS

Service Center

Service: (913) 202-6944

15360 South Mahaffie St
Olathe, KS 66062

Contact

Los Angeles, CA

Service Center

Service: (562) 356-1590

12020 Bloomfield Ave
Santa Fe Springs, CA 90670

Contact

Oklahoma City, OK

Warehouse

Sales: (800) 341-4334

Oklahoma City, OK 73128

Contact

Phoenix, AZ

Service Dealer

Service: (602) 253-0214

2401 S. 19th Street
Phoenix, AZ 85034

Contact

San Francisco, CA

Service Dealer

Service: (510) 342-2212

1930 W Winton Ave #14
Hayward, CA 94545

Contact

St. Louis, MO

Service Center

Service: (636) 203-9811

578 Rudder Rd
Fenton, MO 63026

Contact

Philadelphia, PA

Service Dealer

Service: (215) 822-8300

159 Discovery Dr
Colmar, PA 18915

Contact

Fort Myers, FL

Service Dealer

Service: (239) 693-7477

4821 Waycross Road
Fort Myers, FL

Contact

Odessa,

Service Center

Service: (432) 287-1015

By Appointment Only

Contact

Vancouver, British Columbia

Service Center

Service: (604) 879-6731

6741 Cariboo Rd Unit 205
Burnaby, British Columbia V3N 4A3

Contact

Edmonton, Alberta

Service Center

Service: (780) 434-9578

3804 53rd Ave NW
Edmonton, Alberta T6B 3N7

Contact

Seattle, WA

Service Center

Service: (425) 251-3434

1710 136th Ave E
Sumner, WA 98390

Contact

RECON Equipment Center, WI

Service Center

Service: (608) 834-5220

1828 Haynes Dr
Sun Prairie, WI 53590

Contact
Map of Palmer Johnson Power Systems locations