FW Murphy RP75 Electro/Mechanical Controllers


■ Pulls Injection Pump or Air Intake Shut-off Lever
■ 30 lbf (133 N) Operating Force
■ Models Available for 12 or 24 Volt Systems
■ Operates on Signal from SWICHGAGE® Installed on the Engine or Driven Equipment

FW Murphy RP75 Specs

  • Power Input: 6 to 28 VDC.
  • Power Consumption Standby: <1 mA.Operating Force: 30 lbf (133 N) maximum, 10 lbf (44 N) minimum.
  • Coil Voltage: Specify 12 or 24 VDC.
  • Coil Resistance:
    RP75-12: 32.2 ohms.
    RP75-24: 129.8 ohms.
  • Length of Travel: 1-7/8 in. (48 mm).
  • Control Linkage
    Cable: 4ft. (1.22 m); Optional 8 ft. (2.43 m) or 12 ft. (3.65 m) available.
    Chain (optional): 30 in. (762 mm).

Contact Us

Please be as specific as possible by including how we can assist along with any relevant information such as spec number, BOM number, or serial number.
FW Murphy Logo

Authorized Distributor

Palmer Johnson is an authorized distributor and service provider for FW Murphy products.

Genuine Parts

Thousands of parts ready to ship in as little as two hours from our store at shop.pjpower.com.

Service and Support

Seven master rebuild centers, nine full-service centers, and an extensive dealer network to serve you.