Eaton Airflex Rotorseals

Dual Passage Specifications

Eaton Airflex Dual Passage Rotorseal Product Features

Type AD

• A 1/4"—18 inlet port services each of the passages
• Optional 1/4"—18 outlet port in the mounting flange can be used for the outer passage
• Both passage outlets can discharge directly into the shaft end
• The inner passage nose is sealed on its outside diameter by a pair of "O" rings
• The outer passage is sealed to the shaft end with a compression grommet

Type ADP

• Attaches to the shaft end with a 1"—11-1/2 thread outlet instead of a mounting flange
• TOuter passage outlet feeds into the end of the machine shaft
• Inner passage is a 1/4"—18 port located on a flat of the hex mounting nut

Type BD

• Similar to the Eaton Airflex Type AD but has a larger diameter mounting flange
• The inner passage is sealed with a flat rubber washer, which compresses on the bottom of a counterbore in the shaft end
• A Compression grommet between the shaft end and mounting flange seals the outer passage

Type FDA

• Similar in design to the Eaton Airflex Type BD but has larger passages
• Two inlet ports and two flange outlet ports for the outer passage are 1/2"—14
• Compression grommets between the shaft end and mounting flange seal the inner and outer passages

Single Passage Specifications

Eaton Airflex Single Passage Rotorseal Product Features

Type RH

• Perfect for applications that require a large flow, single-passage Rotorseal
• Incorporates a mounting flange for attachment to the machinery shaft or assembly
• External American National Pipe Threads on the inlet Rotorseal shaft facilitate supply line connections
• Available in five standard port sizes: 0.75", 1.0", 1.25", 1.50", 2.0"

Types AA2, B3 and C2

• Meets most medium-volume, single-passage requirements
• External threads on the seal shaft and standard pipe threads on the inlet port simplify installations
• Available in three standard housing port sizes: 1/8", 3/8", 1/2"