Pdm ff 2019

Murphy by Enovation Intelligent Xpansion Power Distribution Module

The Murphy Intelligent Xpansion™ Power Distribution Module (PDM) expands CAN bus control networks by replacing existing relay and fuse boxes with more reliable solid-state switches that can directly drive work lights, wiper motors, cooling fans, directional DC motors and other high current loads.

Featuring digital switching and up to 15-amp outputs, the module is housed in a compact, sealed enclosure which can be mounted remotely on the equipment to greatly reduce wiring costs. For applications not requiring a CAN bus control, the inputs can directly trigger outputs without the need for a dedicated controller.

Contact Us

Please be as specific as possible by including how we can assist along with any relevant information such as spec number, BOM number, or serial number.

  • Operating Voltage: 8-32V (IX3212-24) for 12V and 24V Systems
  • Total Current: 70 A maximum continuous
  • Dimensions: 245 mm (L) x 140 mm (W) x 50 mm (H)
  • Mass: 0.9 kg (2.0 lb)
  • Operating Temperature: -40°F to 185°F (-40°C to 85°C)
  • Storage Temperature: -40°F to 275°F (-40°C to 135°C)
  • Electrical and EMI/EMC:
    • 2004/108/EC and 2006/95/EC directives
    • IEC 61000-4-3, -4-6 and -4-8
    • EN 60945 / CISPR 11
    • EN 61326-1
  • Shock: 30G, 3 cycles
  • Vibration: 5-25g, 50-2,000Hz, 72 hrs per axis
  • Sealing:
    • IP66 and 67
    • SAE J1455 4.5.3 (10,300 kPa @ 50°C and 100 mm away for 15 min)
  • 12 Outputs:
    • (6) 15 A max per channel, 500 Hz
    • (6) 15 A max, 1 kHz
    • Channel overload set in 2.5 A increments
    • High-side, open-loop PWM and directional DC motor control (H-bridge) modes
    • Off-state leakage current <0.1 mA
  • 20 Inputs:
    • 12 digital, tri-state, input impedance 7.7 kΩ
    • 6 analog, 0-5 V, input impedance 100 kΩ pull-down
    • 2 analog, resistive, input impedance 2.2 kΩ pull-up
    • 10 bit resolution on all analog inputs
  • Sensor Supply: 5V @ 70 mA
  • Communications: 1 CAN 2.0B, 250 kbps, J1939 proprietary messaging
  • Mating Connectors:
    • Deutsch DTHD, DT, and DTP Series
      • J1, J2 – DTHD06-1-4S
      • J3 – DT06-12SA (Gray)
      • J4 – DT06-12SB (Black)
      • J5 – DT06-12SC (Green)
      • J6 – DTP06-2S
  • Certifications: CE mark
Murphy by Enovation Logo

Authorized Distributor

Palmer Johnson is an authorized distributor and service provider for Murphy by Enovation products.

Genuine Parts

Thousands of parts ready to ship in as little as two hours from our store at shop.pjpower.com.

Service and Support

Seven master rebuild centers, ten full-service centers, and an extensive dealer network to serve you.