Murphy valves m2582

Murphy by Enovation M2582-P / M5180-P Fuel Valve

Features:

■ Pneumatically Open and Shut Off Fuel Gas Automatically or Semi-automatically
■ Pneumatic Control Pressure Can Be Air, Gas or Oil
■ Models for 2 in. or 1 in. (51 mm or 25 mm) Fuel Gas Lines


Valve Body: Sandcast aluminum (alodined for corrosion resistance). Optional steel body available on M5180-P models only (see How to Order).

Valve Seat: Buna-N

Valve Inlet Pressure (Maximum):
M2582-P: 80 psi (552 kPa) [5.52 bar]
M5180-P: 100 psi (689 kPa) [6.89 bar]

Parts Exposed to Gas Line Flow:

M2582-P:

  • Aluminum
  • Buna-N
  • 302, 303, and 17-7 PH stainless steel

M5180-P:

  • Aluminum (Steel optional)
  • Buna-N
  • 302, 303, 304, and 416 stainless steel

Control Diaphragm: Flexweave polyester fabric and Buna-N elastomer.

Control Pressure (Maximum):
M2582-P: 75 psi (517 kPa) [5.17 bar]
M5180-P: 80 psig (552 kPa) [5.52 bar]

Contact Us

Please be as specific as possible by including how we can assist along with any relevant information such as spec number, BOM number, or serial number.
Murphy by Enovation Logo

Authorized Distributor

Palmer Johnson is an authorized distributor and service provider for Murphy by Enovation products.

Genuine Parts

Thousands of parts ready to ship in as little as two hours from our store at shop.pjpower.com.

Service and Support

Seven master rebuild centers, ten full-service centers, and an extensive dealer network to serve you.