M5081

Murphy by Enovation M25 / M50 Series Fuel Valve

Features:

■ Instant Response to Shut Off Signal
■ Positive Valve Closure
■ Vents Gases Trapped After Shutdown
■ Explosion-proof Models Available
■ Models Available for Magneto, CD Ignition or 12/24 VDC
■ Normally Energized Model Available


Valve Body: Sandcast aluminum, painted red (corrosion resistance). Optional cast steel available for M5081 and M5081FS models only.

Valve Seat: Buna-N

Maximum Pressure Rating:

  • M2582: 80 psig (552 kPa) [5.52 bar]
  • M5081: 100 psig (689 kPa) [6.89 bar]
  • M5081FS: 100 psig (689 kPa) [6.89 bar]

Coil Rating: Intermittent duty; coil type must match power source;

  • CD ignition coil resistance: 72 Ω
    • CD primary voltage: 1.38 to 3.8 A
  • M5081FS model: Energized to run (continuous-duty coil) coil resistance:
    • 12 Volt model: 33 Ω (0.36 A)
    • 24 Volt model: 136 Ω (0.17 A)
  • Magneto ignition coil resistance: 0.5 Ω
  • Magneto primary voltage: 1 to 5 A
  • Battery coil resistance : 7 Ω
    • 12 or 24 VDC: 1.2 to 2.4 A

Wiring (See Internal Wiring):

  • M2582: Wire leads
  • M5081 and M5081FS: Terminal blocks

Snap-switch Rating: 5 A @ 480 VAC

Laboratory Approval: CSA listed for Class I, Groups C and D Hazardous Locations. 5 amps maximum; intermittent duty; models M5081 and M5081-CD engine ignition powered, and model M5081-B, 12 or 24 VAC or VDC; switch contacts rated 5 A @ 480 VAC maximum.

Contact Us

Murphy by Enovation Logo

Authorized Distributor

Palmer Johnson is an authorized distributor and service provider for Murphy by Enovation products.

Genuine Parts

Thousands of parts ready to ship in as little as two hours from our store at shop.pjpower.com.

Service and Support

Seven master rebuild centers, ten full-service centers, and an extensive dealer network to serve you.