PBL

Twin Disc PBL108P Pilot Bearingless PTO

The Twin Disc PBL108P is a 8.0" SAE J620 pilot bearingless power take-off and a model in the PBL series. It fits SAE #3, #4 and #5 flywheel housings and is rated for 312 Nm (230 lb-ft) organic maximum input torque (390 Nm (288 lb-ft) with sintered iron plates), with a maximum safe speed of 3,100 rpm. Because the PBL108P does not rely on a pilot bearing in the engine flywheel, its spherical main bearings carry the load and remove loading from the engine bearings. That design also simplifies engine installation. A ball bearing throw-out collar and a manual clutch lever provide smooth engagement, and the unit is suitable for both side load and inline applications.

Weight: 41.1 kg (90.6 lbs). Engage the clutch with the prime mover below 1,000 rpm. Offset spacers are available separately for engine flywheels that deviate from the SAE J620 standard. Contact Palmer Johnson for help sizing the PBL108P for your engine and driven load.

Twin Disc PBL108P Specs

SAE J620 clutch size8.0"
SAE housing#3, #4, #5
Max input torque, organic312 Nm (230 lb-ft)
Max input torque, sintered390 Nm (288 lb-ft)
Max safe speed, solid plates3,100 rpm
Max safe speed, split plates3,100 rpm
Weight41.1 kg (90.6 lbs)
Dimension A212.8 mm (8.38 in)
Dimension B117.9 mm (4.64 in)
Dimension C82.2 mm (3.24 in)
Dimension D127.0 mm (5.00 in)
Dimension E44.4 mm (1.75 in)

Dimensions are for the SAE #4 housing and match the drawing on the spec sheet. High inertia loads may require a larger clutch. See the spec sheet for allowable side loads.

Twin Disc Logo

Authorized Distributor

Palmer Johnson is an authorized distributor and service provider for Twin Disc products.

Genuine Parts

Thousands of parts ready to ship in as little as two hours.

Service and Support

Seven master rebuild centers, eleven full-service centers, and an extensive dealer network to serve you.