Auto-Maskin Remote Panels

RP 206E Specifications

The RP 206E Remote Panel, a twin-engine remote panel for Marine Pro 200 and 400 series controllers, is a high-resolution marine display for engine alarming and visualization. Designed for manoeuver and wing stations. Out of the box the RP 206E includes more than 12 inbuilt languages, fuel consumption measurements, unit selection, event log and many more features that vessel operators appreciate at sea.

The ultra-crisp touch screen, color graphics, and fully protected front and rear provide the best readability and reliability under all weather conditions. Capable of displaying up to two engines with a complex set of sensor data.

The RP 206E auto-configures to any 200 and 400 series controllers, which truly reduces installation and maintenance costs. Like the RP 220E, the RP 206E is capable of monitoring two DCUs or Engines.

Compared to the RP 210E remote panel, the RP 206E is a monitor only remote panel for when one wants to maintain operational security.

RP 206E highlights:

• Sun readable, color touch screen, all-glass design
• Configurable graphics
• Alarm and event log for all engines
• Camera support
• Onboard configurable I/O
• Inbuilt troubleshooting and support aid
• Marine Pro auto-configuration – lowest commissioning cost
• Durable, rugged and sealed for use in arduous conditions

The panel connects to DCUs using only a standard Ethernet cable, and will automatically “find” any DCUs that are connected to the network. No configuring, no setup, no hassle. Additionally, when connected, the RP 206E will update itself with any DCU configuration changes automatically, providing seamless consistency across all panels.

Using the brightness-adjustable touch screen, the operator gets full overview and control of the equipment, exactly as operating the DCU engine controller locally at the engine. The operator can select the language at the RP 206E independently of the DCU.

There is no practical limit to how many RP 206E remote panels that can be connected to one engine controller.

Note! A Basic Harness Kit (P/N: 1006946) including one prewired Deutsch DT-connector with a 2 m power cable and three sealing blind plugs for easy installation is available and if needed, this must be ordered separately.

RP 210E Specifications

The RP 210E is a high resolution, sunlight capable remote touchscreen panel for the 200 and 400 series of Marine Pro engine controllers (DCU’s). This responsive touch screen panel is fully weather protected both front and rear, with an IP56 environmental qualification and weather tight connectors.

Compared to the existing RP 210 remote panel, the new RP 210E has the following advantages:

• Higher-resolution screen and better color depth
• Much faster processor
• Capacitive touch screen technology instead of resistive gives better response to operator inputs
• IP56 sealed front and rear
• Deutsch DT-connector connectivity

The panel connects to a DCU using only a standard Ethernet cable, and will automatically “find” any DCU’s that are connected to the network. No configuring, no setup, no hassle. Additionally, when connected, the RP 210E will update itself with any DCU configuration changes automatically, providing seamless consistency across all panels. Today, there is a “one to one” relationship with the network in that the RP displays a replica from one DCU.

Using the brightness adjustable touch screen, the operator gets full overview and control of the equipment, exactly as operating the DCU engine controller locally at the engine. The operator can select the language at the RP 210E independently of the DCU.

There is no practical limit to how many RP 210E remote panels that can be connected to one engine controller.

Note! A Basic Harness Kit (P/N: 1006946) including one prewired Deutsch DT-connector with a 2 m power cable and three sealing blind plugs for easy installation is available and if needed, this must be ordered separately.

RP 220E Specifications

Description

The RP 220E is a high resolution, sunlight capable remote touchscreen panel for twin-engine configurations with 200/200E or 400/400E series of Marine Pro engine controllers (DCUs). This responsive touch screen panel is fully weather protected both front and rear, with an IP56 environmental qualification and weather tight connectors.

The panel connects two DCUs using only standard Ethernet cable, and will automatically “find” any DCUs that are connected to the network. No configuring, no setup, no hassle. Additionally, when connected, the RP 220E will update itself with any DCU configuration changes automatically, providing seamless consistency across all panels.

There is no practical limit to how many RP 220E remote panels that can be connected to one engine controller.

At a glance

• Compact twin-engine remote panel
• Automatically configured from connected DCUs, no programming needed
• Sunlight-capable
• Compatible with any Marine Pro DCU
• “Plug & Play” Ethernet connection
• Reduces clutter at control positions
• Simplifies installation of twin engines
• Multiple panels can be installed

Rich on features

• Dedicated Start/Stop controls
• Operator selectable 12 languages built in
• Operator selectable Metric/US units
• All data accessible on Modbus TCP/RTU

Robust, heavy-duty, reliable

• Glove-capable operation
• Sunlight-capable touchscreen
• IP56 compliant including connectors
• Tough, marine-grade construction

Low installed cost

• One Ethernet cable to engine space only
• 12V or 24V DC power supply
• No programming required
• Reduced space requirement at operating position

Easy to use

• Large clear color touch display
• Icon-based menus
• Dedicated alarm banners
• One-touch alarm list, counters and a protected event log

Why customers select the RP 220E Remote Panel

• Clear, accurate information displayed
• Glove-capable touchscreen
• DNV-GL compliant control logic
• Lower cost of installation
• Proven architecture reduces technical risk
• Single panel focuses operator attention

Note! A Basic Harness Kit (P/N: 1006946) including one prewired Deutsch DT-connector with a 2 m power cable and three sealing blind plugs for easy installation is available and if needed, this must be ordered separately.

RP 410E Specifications

The RP 410E is an 8.4″ color touchscreen panel with a high-resolution screen. The RP 410E can monitor and control up to eight DCU engine controllers in the Auto-Maskin 200 or 400 Series. The panel is also truly self-configuring. Any change in any engine controller’s configuration is immediately reflected into the RP 410E without any operator actions.

The RP 410E is a direct replacement for the existing RP 410. It has an improved 8.4″ color touchscreen panel and a significantly faster processor for instant response and clarity. It is suitable for console mount, an improvement being that it is now IP56 rated when mounted, and of course, retains several IACS Society Approvals.

The RP 410E can monitor and control up to eight DCU engine controllers in the Auto-Maskin 200 or 400 Series. The panel is also truly self-configuring. Any changes in any engine controller’s configuration are immediately reflected into the RP 410E without any operator actions.

Why more customers select the RP 410E

With simple, easy to use “touchscreen” functionality, the information and controls are displayed graphically and with icons for navigation. Highly effective for use in direct sunlight, but also equipped with auto-dimming and a night mode, the RP 410E can be installed anywhere in the vessel. The unit connects to the DCU modules via a simple Ethernet connection, or via Ethernet switches if multiple panels are required.

The RP 410E is approved by many Classification Societies [ see our website for current qualifications], including supporting all requirements for Master Panel, Active Station and remote alarm suppression.

The RP 410E requires no on-site configuration. Once connected to the DCU, it automatically configures itself. With a wide selection of languages installed as standard, with easy “on the fly” changes, the operation is safer and clearer to the operators. The Owner can select from several different templates to provide the preferred panel layout, and uploading and downloading of files (including wallpapers) and information can take place using the USB connection.

By using the password-protected areas, certain parameters of the panel can be adjusted locally if required. Additionally, by DCU’s reading the engine J1939 CANbus available on most electronic engines today, the RP 410E will show fault codes, not only as a numeral but as a plain text description of the event/alarm, providing a clear indication to allow operators to take the appropriate actions. Multiple engines can be displayed on a single panel (1 – 8 limit), and up to four engines on a single page.

The RP 410E can also support up to four IP-cameras, either to monitor engine spaces or provide security coverage, all without a dedicated CCTV system, saving substantially the cost of dedicated equipment and its upkeep.

RP 480i Specifications

Description

The RP 480i is a high resolution, sunlight capable remote touchscreen panel for multiple engine configurations with Marine Pro engine controllers (DCUs) or as a stand alone remote panel. Multiple languages, intuitive menus with simple icons and the latest in graphical interfaces.

The RP 480i can be used as a replacement for the RP 410(E) and of course, retains several IACS Society Approvals.

The RP 480i can monitor and control up to eight DCU engine controllers in the Auto-Maskin 200 or 400 Series. The panel is also truly self-configuring. Any changes in any engine controller’s configuration are immediately reflected into the RP 480i without any operator actions.

Why select the RP 480i

The ultra-crisp touch screen, color graphics, and fully protected front and rear provide the best readability and reliability under all weather conditions. Capable of displaying up to eight engines with a complex set of sensor data.

The panel connects to DCUs using only a standard Ethernet cable, and will automatically “find” any DCUs that are connected to the network. No configuring, no setup, no hassle. Additionally, when connected, the RP will update itself with any DCU configuration changes automatically, providing seamless consistency across all panels.

Modern effective graphics, included dedicated night modes provide clear precise information to operator. The panel has its own dedicated flexible I/O allowing easy integration into vessel sub systems, as well as several options for data integration via J1939, NEMA2000 or Modbus interfaces. With features looking into the feature available now, such as smartphone recognition, proximity sensors and NFC tags, the RP 480i is fully specified to take your vessel into tomorrow's electronic environment.

RSP 305 Specifications

Where remote monitoring of multiple DCU 305 units are required, the RSP 305 should be utilized. The RSP 305 configures itself to the DCU 305 network automatically upon connection, and up to four DCU 305 units can be connected to each RSP 305.

Nearly all information available locally on the DCU 305 engine panel is also available on the RSP 305 remote panel, displayed in the same way using the same high contrast / easy read screen.

Naturally, having the same user interface on the engine room panel and on the remote panel makes vital information available fast.

The RSP 305 remote panel supports both the DCU 305 R2 and the DCU 305 R3 and R3 LT, even used together in the same network.